【NEW】MM-L300A
Available for in-process monitoring!
.A machine available for in-process monitoring in all welding points.
Available for pulsed and CW laser by high speed resolution.
Light weight and compact design.
▶ Features
-
◆ High speed resolution
Enable for high speed resolution with dedicated sensor. Monitoring not only CW laser but also pulsede laer.
-
◆ Comparison judgement
Available for comparing good-data with bad-data. It's effective-use to judge in processing line. *Verifying in advance is needed.
-
◆ Light weight and Compact design
Light weight and compact in this market. Reducing set-up space when you construct processing lines.
-
◆ Two way to set up the sensor
Please choose the sensor on-axis or outside attachment.
-
◆ Easy to operate
Controlling and preserving data in lap-top installed dedicated software.
Model | MM-L300A | |||
MM-L300A | Dimensions (mm) |
230(W)×243(D)×89(H) *Without connector 265(W)×400(D)×117(H) *Within dust-proof case |
||
Power supply | Single phase AC100~240V ±10% 50/60Hz | |||
Power consumption | Less than 150W | |||
Interface | D-sub15 pin | |||
Channel | 1 | |||
Minimum resolution | 1μs | |||
Monitoring time | 1μs~999sec | |||
Comparison function | Analysis | Waveform | ||
Judgement | Maximum and Minimum | |||
Temperature in operation | 0~40℃ (No-condensation) | |||
Humidity in operation | 85%RH or under (No-condensation) | |||
Protection level | IP54(Within dust proof case) | |||
Sensor | Dimensions (mm) |
50(W)×35(D)×96(H) *Without connector 50(W)×35(D)×106(H) *Equipping filter, without connector |
||
Guide light | Green LED | |||
Temperature in operation | 0~50℃ (No-condensation) | |||
Humidity in operation | 85%RH or under (No-condensation) | |||
Protection level | IP64(with connector and cable) |
*Specifications subject to change without notice.
▶ Dimensions in mm