【NEW】300W/500W:Single Mode

Single Mode Laser Single mode & Full-air cooling !NEW

300W / 500W power with no chiller and compact design !
Model : MF-C300A-SF / MF-C500A-SF

Single mode fiber laser welder with full-air cooling which is no chiller.

New line-up of 300W and 500W.

 

 Features

  • ◆ Single mode

    Single mode is Gauss distribution in its beam profile. The penetration is thin and deep compared with multi mode.

    It's easy to weld on narrow area and to reduce spatter.

 

mf-c300a-sf-01-en.jpg

 

    • ◆ Full-air cooling

      The pairing with a dedicated chiller is needed to show its maximum ability.

      Please use the chiller that our company provide.
      The chiller is delivered with it's water piping, thus a customer doesn't need to prepare it.
    • ◆ New line-up

      300W and 500W power models are newly added on single model fiber laser welder series.

      Enable to suggest the suitable power model according to welding schedule.
    • ◆ Reflection resistant characteristic

      Succeeded to suppress the stopping frequencies by back reflection *1. Suitable to weld on high back reflection materials as aluminum and copper *2.

      Equips sensor for detecting back reflection as safety measure to avoid oscillator breaking.
    • ◆ Laser power management

      Brings the quality improving to customers according to the laser power management in processing point by using a power meter.

    • ◆ Controlling function

      Enables to set up various wave, according to the function.
      Available for various way from high speed precise welding to cutting, according to modulation function.(frequency and waveform)

    • ◆ Scanning system

      Employing the Galvo, implements high speed and high efficiency processing.

      Enables to show its superior brightness by using dedicated optical component.
      Wobble welding enables to reduce "quickly heating and cooling" and to restrain "crack"


  •  

    mf-c300a-sf_02-en.jpg

     

    • ◆ Controlling function

      Enables to set up various wave according to the function.

      Available for various way from high speed precise welding to cutting according to the modulation function. (frequecy and waveform)
    • ◆ Saving enargy and space

      Reduces energy consumption compared with previous model, according to design optimization.

      Ensures wider space to set up machines, according to light and compact design.
    • ◆ Useful user interface

      Large LCD touchscreen allows to input settings easily.

      Japanese and English are available. Enables to use an extension cable.
    • ◆ Scanning system

      Employing the Galvo, implements high speed and high efficiency processing.

      Enables to show its superior brightness by using dedicated optical component.
      Wobble welding enables to reduce "quickly heating and cooling" and to restrain "crack"
    • *1: According to our research. It indicates the new machines tend to not stop easily by back reflection, based on comparison of equal focal diameter.
      *2: Sample test is needed.




Model MF-C300A-SF MF-C500A-SF
Mode Single mode
Maximum power 300W 500W
Optical fiber RQB / Single mode fiber
Pulse width REPEAT Standard 0.1~500.0ms (0.1ms steps)
Setting switching 0.05~500.00ms (0.05ms steps)
CW Standard 0.1~1000.0s (0.1s steps)
Setting switching 0.001~10.000s (0.001s steps) / 
0.01~100.00s (0.01s steps) / 1~10000s (1s steps)
Repeated number of pulse 1~1000pps
Modulation 1~5000Hz (rectangular wave, triangular wave, sinusoidal wave)
Oscillation wavelength Fundamental wavelength
Positioning guide laser Builtin visible laser (red)
Power stability Less than ±2% (more than 100W) *1
Less than ±3% (less than 100W) *1
Number of schedule 256
Measurement function Energy(J), Average power(W)
Counter Displays the total number of outputs (9 digits),
Displays the total number of acceptable outpus (9 digits),
Displays the total LD ON time (7 digits),
Displays the laser output time (7 digits)
Laser controller and language Touch panel, Removal (Japanese and English are available)
Power supply / Breaker rated current Single phase AC200V~240V ±10%  50/60Hz / 20A
Power consumption Maximum 2.0kW 3.3kW
Standby 0.5kW 0.5kW
Cooling method Full air cooling
Ambient temperature / Ambient humidity 10~35℃/ 20~85%RH
Dimension 556mm(W) X 744mm(D) X 902mm(H)

*1: In case of satisfying the condition / Ambient temperature chage: With in ±5℃ change among, Laser emitted time: With in 8 hours

*Specifications subject to change without notice.

▶ Dimensions in mm

 

mf-c300a-sf_03en.jpg