For cleaner and finer welding!
- ◆ Stable clean weld without heat affected area.
- ◆ High efficiency fiber laser system contributes reduction of CO2 emission. (Its power consumption is approximately 75% less than the lamp-pumped laser welders.)
- ◆ Real-time Power Feedback feature ensures stable welding under optimum weld conditions.
- ◆ Up to three energy sharing and time sharing. (Option)
- ◆ Small footprint design saves spacing.
- ◆ Up to 2 deliveries of laser output are available at powersharing; up to 3 deliveries of laser output at timesharing. (Option)
▶ Real-time power feedback
The laser output in the lamp-pumped module is monitored in real time. The monitored laser output is compared with the set waveform and power is fed back in real time, varying the energy input to the lamp to reproduce the set waveform and obtain the ideal laser output waveform.
▶ Waveform control
Equipped with a "fixed mode" that features three-level waveforms, and a "flex mode" to provide more complex waveforms.
▶ Power monitor
Laser energy (J) and average power (W) are monitored to detect abnormalities.
▶ Color LCD touch panel
The touch panel can be detached from the main unit and operated by hand.
▶ External communications
Configuration of parameters and monitoring of performance can be carried out from a separate location.
- Type: RS-485 compliant, asynchronous, full duplex
- Data speed: 9600, 19200, 38400 bps
This feature avoids marks at the end of seam welding and provides a beautiful finish even for overlapping circumference seam welding sections.
Maximum average power
Maximum peak power
|Output control||REPEAT mode||Standard: 0.1 to 500.0ms (0.1ms steps)|
|Setting switching: 0.05 to 50.00ms (0.05ms steps)|
|CW mode||Standard: 0.1 to 1000.0s (0.1s steps)|
Setting switching: 0.001 to 10.000s (0.001s steps)
0.01 to 100.00s (0.01s steps)
1 to 10000s (1s step)
|Pulse repetition rate||1 to 5000pps|
|Modulation function||1 to 5000Hz (Sine wave, triangle wave, square wave)|
|Oscillation wavelength||1080nm to 1100nm|
|Safety shutter||With open/close sensor|
|Positioning guide beam||Built-in visible laser (Red)|
|Output power stability||±3% or less @ less than 100W, ±2% or less @ 100W or more|
|Fiber optic delivery||Up to 2 deliveries of laser outputare available at powersharing; up to3deliveries of laser output at timesharing. (Option)|
|No. of programmable schedules||256|
|Measuring and monitoring||Laser energy (J), average power (W)|
|Counter||Total number of outputs||9 digits|
|Number of acceptable outputs||9 digits|
|Power requirements||200 to 400VAC, +10% -15%, 50/60Hz, three pahse|
|Power consumption||5.7kW at max. (0.7kW whilestand-by)|
|External communication function||RS-485, LAN (100BASE-TX/10BASE-T)|
|Heat exchange method||Water - Water|
|Ambient temperature||5 to 50°C|
|Dimensions||569(W) X 1069(D) X 1110(H)|
*Specifications subject to change without notice.
▶ Dimensions in mm
◢ Depth of penetration at full power.
◢ High speed welding for sealing a diaphgram. (t=0.4mm x 1mm, stainless steel)
◢ Fine spot welding of SUS meshes
◢ Cutting of stainless steel