• ML-C300A

ML-C300A

Cleaner & Finer. Welding can be performed!

This is AMADA MIYACHI's original technology and provides high-quality welding.
Model : ML-C300A

▶ Features

  • Welding with a few heat-affected area can be done due to that laser welding is "contactless" welding.
  • Real-time Power Feedback feature ensures stable welding under optimum weld conditions
  • Employing an optical fiber makes its automation easy
  • High power oscillator enables high speed seam welding

 

型號

ML-C300A
標準型

ML-C200A(30J)
高亮度型

ML-C200A(60J)
高亮度型

最大額定輸出

300W

200W

200W

輸出能量種類

30J TYPE(脈衝寬度5ms)

90J TYPE(脈衝寬度25.7ms)

30J TYPE1(脈衝寬度6.6ms)

 

 

30J TYPE2(脈衝寬度8.5ms)

 

 

60J TYPE1(脈衝寬度17.1ms)


60J TYPE2(脈衝寬度20ms)


 

最大功率

6kW (僅限5ms及以下)

5kW (僅限5ms及以下)

4kW (僅限5ms及以下)

5kW (僅限5ms及以下)

 4kW (僅限5ms及以下)

建議光纖

SIΦ0.4mm~

 

 

 

 

 

 

150W以下SIΦ0.2mm~

 

150W-200W SIΦ0.3mm~

 

 

SIΦ0.2mm~

 

 

 

 

 

 

150W以下SIΦ0.2mm~

 

150W-200W SIΦ0.3mm~

 

 

SIΦ0.2mm~

 

 

 

 

 

 

脈衝寬度

標準:0.3~100.0ms (0.1ms step)
根據設定切換:0.25~5.00ms(0.05ms 
單位)

脈衝頻率

0.2~10.0ms (0.1ms單位)
0.20~5.00ms (0.02ms
單位):設定切換

脈衝頻率

1~500pps

諧振波長

1.064μm

輸出穩定性

±3%:1脈衝的輸出能量在5J以上,峰值功率在1kW以上時

輸入電源

3相4 線 AC380V±10% 50Hz

分光種類

最大4 路分光 1) 單一、 2) 同時2路分光、3) 同時3路分光、4) 同時4路分光、5) 分時2路分光、6) 分時3路分光、

 7) 分時4路分光、8) 同時2路分時2路分光

冷卻器

熱交換方式,水—水

雷射型號

觸控式螢幕 ( 國產 ) (漢語:繁體/簡體、英語)
遠距離操縱機:MLE-118A-01,延長線 3m (選購品)

雷射控制器

MLE-118A-01(漢語:簡體)

遠距離操縱:延長線 3m (選購品)

功能

雷射輸出波形值,上下線判定用雷射能量、將左邊組合可進行32類設定

每秒輸出次數、反復輸出次數、雷射能量(J)、平均功率(W)、

顯示總輸出次數(9數位)、顯示被判定為良的輸出次數(9數位)

使用環境

環境溫度、濕度5~35℃、85%以下

尺寸

1173(H)x 560(W)x 1310(D)mm

重量

約320KG

 

◢ Fillet welding

ml-2450a_jp.png

Fillet welding on 0.6-mm and 1.0-mm stainless-steel materials Forms neat welding beads with sufficient strength, thereby eliminating the need for after processing.

◢ Welding on box-type workpieces

sample2.jpg

Angle welding on box-type 0.6-mm stainless-steel workpieces Achieves bonding with little distortion.

◢ Cross section of penetration portion

sample3.jpg

Cross section of 1.0-mm stainless-steel materials bonded by lap welding with the ML-2550AH Lap welding achieves deep penetration across each material as thick as 2 mm.

◢ Example of spot welding

sample4.jpg

Example of lap spot welding on iron-based material

◢ Example of welding aluminum materials

sample5.jpg

Examples of 0.5-mm fillet and butt welding