Model : YS-HF80

Q'ty :

Add To Inquiry

Equipped with Japanese Brand, TETRA-K INVERTER-Controlled POWER SUPPLY, TH-26VF, TH-50VF, TH-50VFS (Optional), with the positives as below; 

1.Inverter frequency changes automatically according to the welding current, thus the ideal direct current can be fed.

2.The second current, second voltage, or second power can be controlled in any desired pattern by software.

3. Settings can be done easily by observing bright display (LCD with back light)

4. 15 welding conditions and various input/output signals are available, considering the possible connection to such as pressurized output and other machinery 

5. Good or No Good judgment can be done by current value monitoring either in the constant power mode or the constant voltage mode.

6 The Maximum setting conditions is 9 for 2 welding cycles setting value (Except TH-50VFS)

7.Peak value of the welding current becomes low, thus splash becomes less.

8.Current control is done with high accuracy and high-speed responded by 16 bits high performance calculation circuit.

9.External setting / Operation / Mode status monitoring or data control can be documented by communication function. (This function is available in optional device RS-232 and RS-422.)  

1.Capacity: 25KVA

2.Input: 220V

3.Desk-Top Type

4.Pneumatic Control System 

Nominal Capacity
Input Voltage
Max. Welding Current
Max. Weld Power
Duty Cycle
Max. Pressurization
Throat Size
Cooling Water
KVA V Hz A KVA % kg Mm L/Min
YS-HF504 50 220/440 50/60 20000 110 10 500 200*400 15
YS-HF1004 100 220/440 50/60 30000 220 10 1000 200*400 15
YS-HF1504 150 440 50/60 42000 330 10 1000 200*400 15

1.If you can not find the needed model in our cataloque, please inform us the specifications in detail. Our engineers will work with you to customize machine to your specific application requirement.

2.Specifications are subject to change without prior notice due to constant improvements.