100KVA Three Phase Pneumatic DC Welding Machine
1.High power factor, DC current output, no inductive losses. Only minimal input is required, which comes out large Current output
2.Welding temperature point can be quickly reached, shorten welding time. No pulsating current, good welding appearance
3.Built-in Temperature protection switch to avoid SCR and transformer from overheating and breakdown. Digital microcomputer Controlled setting, welding time zero error.
4.Ideally applied in large dimension welding parts of Automotive, motorbike, Multi-Point projection welding & 1.2 up thickness of Aluminum sheet welds
|
型式 Type |
定格容量 Nominal Capacity |
一次電壓 Primany Voltage |
週波數 Frequency |
最大短路電流 Max. Short-Circuit Current |
最大溶接入力 Max. Weld Input |
使用率 Duty Cycle |
喉部尺寸 Throat Size Gap x Depth |
電極行程二段式 Two-Step Stroke |
最大加壓力 Max. Pressure Force |
冷卻水量 Cooling Water |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| KVA | V | Hz | A | KVA | % |
間隔X深 mm |
mm | kg | L/Min | ||
|
Single-Phase Input 單相入力 |
YS-DC354 | 35 | 1φ220 | 50/60 | 21,000 | 90 | 7.5 | 200*600 | 30.8 | 500 | 20 |
| YS-DC504 | 50 | 1φ220 | 50/60 | 29,000 | 151 | 4.5 | 200*600 | 30.8 | 500 | 20 | |
| YS-DC754 | 75 | 1φ220 | 50/60 | 37,000 | 210 | 5 | 200*600 | 100 | 1000 | 20 | |
|
Three-Phase Input 三相入力 |
YS-DC1004 | 100 | 3φ220 | 50/60 | 35,000 | 305 | 5 | 300*500 | 80 | 1500 | 30 |
| YS-DC1504 | 150 | 3φ220 | 50/60 | 48,000 | 460 | 5 | 300*500 | 100 | 1500 | 30 | |
| YS-DC2004 | 200 | 3φ220 | 50/60 | 65,000 | 610 | 5 | 300*500 | 100 | 3000 | 30 | |
1.If
you can not find the needed model in our cataloque, please inform us the
specifications in detail. Our engineers will work with you to customize machine
to your specific application requirement.
2.Specifications
are subject to change without prior notice due to constant improvements.